Downtown Doug Brown » Fixing an NZXT Signal 4K30 part 2: the green/pink video bug
- Last year, I repaired an NZXT Signal 4K30 USB capture device that I bought on eBay for cheap.
- It was completely dead, and the cause turned out to be a bad solder joint on an inductor, which prevented power from getting to a crucial part of the board.
- After I fixed it, I tried using it to capture signals from a bunch of different HDMI source devices to make sure it worked correctly.
Unverified
- Last year, I repaired an NZXT Signal 4K30 USB capture device that I bought on eBay for cheap.
- It was completely dead, and the cause turned out to be a bad solder joint on an inductor, which prevented power from getting to a crucial part of the board.
- After I fixed it, I tried using it to capture signals from a bunch of different HDMI source devices to make sure it worked correctly.
Sources: Downtowndougbrown